Ring Joint Flange

Approx. Rs 110 / PieceGet Latest Price

Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure "Tappings", mostly on 2 sides, directly opposite each other, are machined into the orifice flange. This makes separate orifice carriers or tappings in the pipe wall unnecessary.

Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining.

The image on the right shows a set Orifice Flanges, where a Orifice Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges for inspection or replacement of the Orifice Plate and gaskets.

The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2" NPT tappings in each flange.

The American National Pipe Thread Tapered

NPT is the best known and most widely used connection where the pipe thread provides both the mechanical joint and the hydraulic seal. NPT has a tapered male and female thread which seals with Teflon® tape or jointing compound.

ASME B1.20.1 covers dimensions and gaging of NPT pipe threads for general purpose applications.

ASME B16.36 covers Dimensions and dimensional tolerances from orifice flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following flanges:

• Welding Neck Classes 300, 400, 600, 900, 1500, 2500
• Slip On Class 300
• Threaded Class 300

Additional Information:

• Production Capacity: 10 METRIC TONNES
• Delivery Time: 5 - 15 DAYS

Approx. Rs 90 / PieceGet Latest Price

Product Price :Get Latest Price

Approx. Rs 200 / PieceGet Latest Price

A ring-type joint flanges (RTJ) is used when a metal-to-metal seal between the mating flanges is required (which is a condition for high-pressure and high-temperature applications, i.e. above 700/800 C°). A ring type joint flange features a circular groove to accommodate a ring joint gasket (oval, or rectangular).

As the two ring joint flanges are bolted together and then tightened, the applied bolting force deforms the gaskets inside the flange groove creating a very tight metal-to-metal seal. To make this happen, the material of the ring joint gasket has to be softer (more ductile) than the material of the flange.

RTJ flanges can be sealed by RTJ gaskets of different styles (R, RX, BX) and profiles (example: octagonal/oval for the R style).

The most common RTJ gasket is the R style with an octagonal section, as it ensures a very strong seal (the oval section is an older type). A “flat groove” design, however, accepts both RTJ gaskets having an octagonal or oval section.

Additional Information:

• Production Capacity: 10 METRIC TONNES
• Delivery Time: 5-15 DAYS

Approx. Rs 1,000 / PieceGet Latest Price